De Havilland Twin Otter aircraft sales, parts, repairs, overhauls, support and service are specialties of Texas Air Services.
"Specializing in Twin Otters"


Crane Canister Fuel Boost Pump

Texas Air Services is authorized to repair, overhaul and test the boost pump and it's
components. We have the capabilities to repair parts of the pump that would
normally need replacement

 


Welded Nose Landing Gear Fork
Complete Repair / Overhaul

All Repairs
Approved

Axle Bushings and Lower Torque
Link Attachments Repaired / Replaced
Internal Inspection and Re-Coating


flyer1.gif (2229 bytes)FAA approval has been received to repair the steering actuator housing back to manufacturer’s original specifications. (All bores, bushings in lug areas, re-coating of inside & outside surfaces).

 


flyer2.gif (1878 bytes)We have received approvals for repairing nose gear cylinders. Some repairs include but not limited to thread restoration, Bushing replacement, corrision or damage removal from lower bearing areas, and key seat slots.

 


flyer4.gif (2834 bytes)We have received approvals for repairing nose gear forks. Some repairs include but not limited to oversize bushings in axle bores, bushing replacement in lower torque arm attachments, and corrision removel in piston tube bushing area.

 


Approval to Overhaul and Weld the Main Gear Legs as per DeHavilland data. Check our prices for overhaul and exchange.

________________________________________________________________________________________________________________________

Nose Landing Gear Overhaul & Exchanges

71-100-Series


 

Beta Slide Bracket

C6E1060

The purpose of this repair is to provide a method to return to service the DHC-6 Twin Otter Beta Slide Bracket that has worn the slide slot to the extent that the linkage and signal switch is beyond adjustment of the OEM service limits. The slot in the bracket wears to inconsistent widths creating hard spots and loose non-perpendicular axis for the slide to operate correctly. This condition causes slack in the linkage and misalignment of the ramp for the switch on the slide. Our repair process will restore the bracket to the original dimensions called out by the OEM to allow for proper function of the switch at a much less price than replacing the bracket with a new part.

__________________________________________________________________________________________________________________________________________

Complete Restoration Of Long Nose Assembly for Twin Otter


 

 

 

 

 

 

 

 

"At Texas Air Services, Inc., we are committed
to keeping our Twin Otter customers flying."


[HOME] [SERVICES] [AAT] [CONTACT] [EMAIL] [SPECIALS] [PROJECTS]
[REPAIR-OVERHAUL CAPABILITIES] [LINKS] [DROP TESTING]
4418 Illinois   Dickinson, Texas 77539
1-800-313-6506 (281) 337-7763  Fax (281) 534-4580

sales@texasairservices.com

Site created and hosted by PCNetCom.
Copyright © 1998 Texas Air Services. All rights reserved.
Last revised: August 23, 2004